1. Teleboard | Support Center
  2. Solution home
  3. Yealink T4 Series Phones User Guides – T43U, T46U, T48U
  4. Yealink SIP-T46U
Open navigation

Yealink SIP-T46U – Voicemail Access, PIN, Configuration, and Prompts

When receiving a new voicemail the phone will play a tone and the power indicator LED will slowly flash red. The screen will prompt the number of new voicemails with a pop-up window and a counter next to    icon at the status bar.



Configuration


Before listening to voicemails a voicemail access code need to be configured. Alternatively you can use a Telebroad system code dialed from your phone (by dialling *1) or remotely to listen to your voicemails and access voicemail options (such as greetings and PIN)


To configure the voicemail access codes:


  • Navigate to Menu>Messages>Voice Mail>Set Voice Mail.

  • Highlight the account which you want to set.

  • Press the 123 soft key to select the proper input mode and enter *1 (the voicemail access code).



  • Press the Save soft key to accept the change or the Back soft key to cancel.

Accessing Voicemail Messages


After you have configured the access code you can listen to your voicemails. 


To listen to your voicemails:

  • Do one of the following:

    • When the phone prompts of a new voice press   or the Connect soft key.

    • Navigate to Menu>Messages>Voice Mail>View Voice Mail.

      The screen displays the number of new and old voicemails

      Select an account and press the Connect soft key.



  • Follow the voice prompts from the system (see next) and, if requested, enter your mailbox PIN.

    You can change the PIN from the mailbox options by pressing 0 (see below), from the voicemail settings of the TeleConsole web version, or from the admin portal (Features>Mailboxes). The later two options can help you if you forgot your PIN.

  • After you have listened to all new messages the power LED indicator will go off.

Voice Prompts 


The following is a list of all the voice prompts you can use while listening to your voicemails:



  • Press 1 to play the first message in the current folder. The default folder is New Messages. If you don't have new messages the default folder is Old Messages.

    During the message playback you can press * at any time to replay it from the beginning (without the envelope).

    During or after the message playback you can do any of the following:

    • Press to go back to the first message in the folder.

    • Press 2 to change the folder.

      Initially just two folders are available – press 1 for New or 2 for Old.

      New folders become available as you move or copy messages into them (see option 8 below.)

      Note that folders are available only in the voice prompts system. They do not appear in the TeleConsole!

    • Press 3 to play the envelope of the message – date, time, caller's name or number, and duration.

      You can select what you want to play from the voicemail settings of the TeleConsole Web version or from the admin portal (Features>Mailboxes).

    • Press 4 for the previous message or 6 for the next one.

    • Press 5 to replay the message (including the envelope).

    • Press 7 to delete the message (be warned that no additional prompt is given before deletion is performed. So be careful!)

    • Press 8 to move/copy the voicemail message to a different folder and select one of the message folders – Deleted, Urgent, New, Old, Work, Family, Friends, Customer 1, Customer 2, Customer 3, Customer 4, and Customer 5.

      The folders are always listed in this order and you select them by pressing the 0-and keys. The actual key that corresponds to a folder changes slightly depending on which folder you are currently in. So 2 may be for either New or Old and 3 may be for either Work or New etc. Just listen to the prompts.

      Now press 1 to move the message, 2 to copy it, or  * to cancel.

    • Press 9 to forward the message to another mailbox. Enter the mailbox number and press #.

      Press 1 to move the message to the mailbox, 2 to copy it, 3 to add another destination mailbox, or * to cancel.

    • Press 0 for mailbox options (see below.)

  • Press 2 to change folder.

    Initially just two folders are available – press 1 for New or 2 for Old.

    New folders become available as you move or copy messages into them (see option 8 above.)

  • Press 0 for mailbox options:

    • Press 1 to create or change your Unavailable Greeting (played when you don't answer your phone.)

      Press 2 to create or change your Busy Greeting (played when you are on another call.)

      Press 3 to create or change your Temporary Greeting (played if you are unreachable, like when you are logged out of all your queues or toggled your availability status to Do not disturb.)

      Press 4 to create or change your Name (played if the Unavailable Greeting is not set up. The system will play your name followed by saying "is unavailable".)

      For all the greetings:
       
      • If there is no prior greeting recording you will be prompted to press 1 to record a new one or * to return to the previous menu.

        Press # to end the recording. You will be prompted to press 1 to rerecord the greeting, 2 to listen to it, to delete it, or * to return to the previous menu.

      • If a prior recording already exists you will be prompted to press 1 to rerecord it, 2 to listen to it, to delete it, 4 to activate/deactivate it, or * to return to the previous menu.

    • Press 5 to create or change your voicemail PIN (Personal Identification Number to secure access to the mailbox.) You will be prompted to enter your new PIN followed by # and reenter it for verification. If both entries match the PIN will be updated.

      A voicemail PIN may contain only numeric digits and must be at least four digits long. It can be as long as one hundred digits. 

    • Press * to return to either the main menu or the last message you were listening to.

Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select atleast one of the reasons

Feedback sent

We appreciate your effort and will try to fix the article