Call Transfer (Blind, Attended, Semi-Attended, BLF/DSS)

• Types of Call Transfer 
• Transferring Calls with the Transfer Key  ---
  
  • Blind Transfer
  • Attended/Semi-Attended Transfer
• Transferring Calls with a BLF or DSS Key ---
  
  • Transfer Mode Configuration
  • BLF key Transfer
  • DSS Key Transfer

Types of Call Transfer

You can transfer a call on the Yealink SIP-T43U in three ways:

• Blind Transfer: Transfer a call directly to another party without consulting.
  
  
• Semi-Attended Transfer: Transfer a call when the target phone is ringing.
  
  
• Attended Transfer: Transfer a call with prior consulting.

All three ways can be performed using either the transfer key (physical or soft), a DSS key, or a BLF key. 

Another transfer method, using a Telebroad system dial code, allows you to transfer a call directly to a voicemail of your choice.

Transferring Calls with the Transfer Key

An active call can be transferred to a number, a local contact, a number from a  call history record, or a contact from a remote phone book.  

To transfer a call:

• Press    or the Transfer soft key during a call.

• Enter a phone number to transfer the call to or do one of the following:

• If you have configured a Speed Dial key, you can press it to transfer the call to its associated contact directly.
  
  
• Press the Directory soft key and select Local Directory.
  
  Select the desired group and search for a local contact.
  
  
• Press the Directory soft key and select History.
  
  Select the desired list and select a call history record.
  
  
• Press the Directory soft key and select Remote Phone Book.
  
  Select the desired group and search for a remote contact.
  
  

• For a blind transfer – Select B Transfer or press    to complete the transfer.
  
  
• For an attended/semi-attended transfer – press    or the Send soft key to dial out.
  
  
  • Press    or  the Transfer soft key when receiving a ringback to complete a semi-attended transfer.
    
    
  • After the party answers the call, press   or  the Transfer soft key to complete an attended transfer.

If you are using a handset, an attended/semi-attended transfer can be completed by hanging up the handset.

You can cancel the transfer before the call is connected by pressing the Cancel soft key.

Transferring Calls with a BLF or DSS Key

Transferring a call with a BLF key is a convenient way to transfer calls to users on your office phone system. The call will be transferred to the user monitored on the BLF key so you do not need to enter or select any phone number.

You can also set up a DSS key to transfer a call to a specified contact, giving you a one-press transfer feature.

You need to configure the transfer mode (blind, semi-attended, attended, or user selected) in advance on the web user interface.

Transfer Mode Configuration

The default BLF or DSS transfer mode is blind transfer, but it can be changed from the web user interface. 

To configure the transfer mode:

• Access the web user interface as described here.
  
  
• Navigate to Features>Transfer.
  
  
• Select the desired transfer mode from the Transfer Mode via Dsskey pull-down list – Blind Transfer or Attended Transfer.
  
  Alternatively, select Select Transfer to have the option to choose how to transfer the call after pressing the BLF or DSS key.
  
  If you select New Call the DSS or BLF key will dial the user instead of transferring a call to him.

BLF key Transfer

You can transfer a call to a BLF extension that is indicated by either a solid green (available) or a solid red light (already on a call).

To transfer a call with a BLF key:

• Press the relevant BLF key to transfer the call. The call will be placed on hold and the BLF key will blink red.
  
  
• If you configured the transfer mode for Blind Transfer the call will immediately get transferred.
  
  
• If you configured the transfer mode for Attended Transfer wait for the monitored user to answer and see if he wishes to accept the call. Press  the BLF key again or select Transfer to complete the transfer.
  
  
• If you configured the transfer mode for Select Transfer you will get the option to select the transfer method or, instead, to place a new call to the user on the BLF key.
  
  
• The BLF key will become solid red once the call is transferred.

DSS Key Transfer

You need to configure the DSS key and assign a contact to it before you can perform a transfer.

To configure a Transfer DSS Key:

• Do one of the following:
  
  
  • From the idle screen select Menu and navigate to Features>DSSkey.
    
    Select the desired line key.
    
    
  • Long press the desired line key to set it.
    
    
• Select Key Event from the Type field.
  
  
• Select Transfer from the Key Type field.
  
  
• (Optional.) Enter the string that will appear on the screen during the transfer in the Label field.
  
  
•  Enter the number you want to transfer the call in the Value field and or select Directory and choose the desired contact from the directory list.
  
  
• Select  Save.

Transferring a call with the DSS key:

• During a call, press the DSS key you configured above to transfer the call to the specific contact.
  
  
• If you configured the transfer mode for Blind Transfer the call will immediately get transferred.
  
  If you configured the transfer mode for Attended Transfer wait for the monitored user to answer and see if he wishes to accept the call. Press the DSS key again to complete the transfer.
  
  
• If you configured the transfer mode for Select Transfer you will get the option to select the transfer method or to place a new call to the user associated with the key.