Voicemail Configuration and Access

When receiving a new voice mail, the icon   appears in the status bar with the number of unread voice mails and the power LED will slowly flash red.


Configuration


Before you can listen to voice mails you need to configure the voice mail access code. Alternatively you can use a Telebroad system code dialed from your phone or remotely to listen to your voicemails and access voicemail options (such as greetings and PIN)


To configure the voice mail access code:


  • Press   to enter the main menu.

  • Select Voice Mail>Set Voice Mail.

  • Select Enabled from the Status field.

  • Enter *1  (the voice mail access code) in the Number field.

  • Press the OK soft to accept the change or the Back soft key to cancel.

Access


To access and listen to your voice mail:


  • Do one of the following:

    • Press   to enter the main menu.

      Select Voice Mail>Play Message.

    •  Press the Message key ().

    • Long press when the handset is idle.

  • If you have not set the voice mail access code you will be redirected to the setup screen to configure it first.

  • The handset dials out the voice mail access code using the selected line automatically.

  • Follow the voice prompt from the system server to listen to your voicemails  or you can press 0 to access mailbox options.

Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.