Making or Rejecting Anonymous Calls

You can use anonymous call to block your identify and phone number from appearing to the recipient. Anonymous call is configurable on a per-line basis. 


You can also select an Unknown or Blocked caller ID in the TeleConsole's general or phone settings (see DesktopAndroid, or iOS versions) or use Telebroad's Private Caller ID dial code to achieve the same result. 


Your phone also has a feature to automatically block incoming anonymous calls, some of which may be unsolicited. Additional features to block unwanted calls and SPAM text messages are available from the TeleConsole and the Admin Portal. See more information here


Making Anonymous Calls


To configure anonymous call:


  • Press Menu and select Features>Anonymous.

  • Select the desired line and press the Enter soft key.

  • Press  , ,  or the Switch soft key to select Enabled from the Local Anonymous field.



  • Press the Save soft key to accept the change or the Back soft key to cancel.

Anonymous call is also configurable via the web user interface at the path Account>Basic.


To place an anonymous call:


  • Using the specific phone line you configured above, place a call to phone B.

  • The  screen of phone B prompts an incoming call from Anonymous.


If the recipient has enables an anonymous call rejection on his phone, you may be prompted that the he does not accepts calls from an anonymous number.


Anonymous Call Rejection


You can use anonymous call rejection to reject incoming calls from anonymous callers. 


Anonymous call rejection automatically rejects incoming calls from callers who deliberately block their identities and numbers from being displayed. Anonymous call rejection is configurable on a per-line basis. You can also configure the phone to send anonymous call rejection on/off code to the server to activate/deactivate anonymous call rejection on the server side.


To configure anonymous call rejection:


  • Press Menu and select Features>Anonymous.

  • Select the desired line and press the Enter soft key.

  • Press  , , or  the Switch soft key to select Enabled from the Anony Rejection field.



  • Press the Save soft key to accept the change or the Back soft key to cancel.

Anonymous call rejection is configurable via the web user interface at the path Account>Basic.

Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.